Home
Products
Cross Match
How To Use
Literature
Buy Online
About Us
FAQ
 
HOW TO USE
Custom matched caulk and repair products for the laminate industry.

FormFill Color Matched Caulk Application Instructions

How to Apply:

  1. Knead tube before using.
  2. Ensure the two surfaces of the joint are clean and dry.
  3. Apply a thick bead of caulk to to the joint to be sealed 
  4. Press the caulk firmly down between the two inside surfaces of the joint.  This will ensure a good contact bond to support the joint.
  5. A thin film of caulk over the joint is not recommended.
  6. Remove excess with a damp sponge.
  7. Some shrinkage might occur during final drying. If this occurs, reapply a light coat over the existing application. 

Note:

  1. Protect from freezing.
  2. FormFill Color Matched Caulk will dry darker than when first applied.
  3. FormFill Color Matched Caulk is non-toxic, non-flammable, mildew resistant and cleans up with water.

Downloadable Information


Instructions

  


MSDS



 


FormFill Laminate Repairer Application Instructions

FormFill Laminate Repairer has been designed to bond (adhere) to the phenolic backer of HPL (high pressure laminate). The backer is either brown or black in colour. It will also adhere to particleboard, medium density fiberboard, and plywood. FormFill Laminate Repairer is not designed to adhere to the surface of HPL.

  1. Prepare the surface of the area to be repaired by exposing the phenolic backer or substrate. Thoroughly clean the area with FormFill Solvent** (Acetone). It is important to use 100% acetone when working with the product.
  2. Squeeze the Repairer onto the leading edge of a stainless steel flexible putty knife. Draw the repairer across the area to be repaired by flexing the putty knife. This action will force the repairer down into the area to be repaired. Repeat this action several times until the repairer starts to harden.
  3. Remove any excess Repairer from around the area being repaired with the leading edge of the putty knife. Wait approximately 15 minutes to allow the product to completely dry.
  4. FormFill Laminate Repairer is a solvent based product and some shrinkage will occur. If the repairer has shrunk below the surface being repaired, simply repeat steps 2 & 3 until the repair is satisfactory.
  5. Use a tissue or cloth with FormFill Solvent, and with light pressure, blend the repairer level with the surface.

Downloadable Information:


Instructions

 

  


MSDS

 

* Product contains Toluene and is harmful by inhalation. Keep out of reach of children. Keep away from sources of ignition. Avoid contact with eyes.

* Manufacturer makes no warranty of any kind, expressed or implied, concerning the use of this product. User assumes all risks of handling or use whether in accordance with the directions or not.

 ** A 0.5oz bottle of FormFill Solvent will be included with every online purchase of FormFill Laminate Repairer.

 

 

 
CUSTOMER LOGIN
Shop faster, be up to date on an orders status, and keep track of the orders you have previously made.
 
 
FIND THE RIGHT COLOR
If you know your Laminate brand, use the options below. If you do not, please go to our Cross Match page.
Brand
Color
 
 

© Copyright FormFill. All rights reserved.
Home | Products | Cross Match | How to Use | Literature | Buy Online | About Us | Contact Us | Technical Data
Site Map | Privacy and Security | Terms of Use

Site developed and hosted by Enlightened Technology Group, Inc.